UrbanOffroad215
Newbie
Recently I did some repairs concerning my intake manifold and fuel injectors. (Vortec 5.7 SFI) After my repairs the motor ran great for about a week. Around day 5 it started giving me some trouble starting..It would take about 2-3 cranks to turn over..then a few days later it turned into 4-6 cranks. Now it just cranks and does nothing. Not even a sputter. If i spray a little starting fluid in the intake, it fires right up with no hesitation on the first crank and runs smoothly. Once started, It runs and drives fine under normal driving conditions. If i put the peddle to the floor, It struggles like it is starving for fuel and wont go above 3000 RPMs. I replaced all of the seals and gaskets on my injectors and manifold, Installed a new air filter and fuel filter. All connections are connected and secure. Checked my fuel pump and it is working properly.
I am completely puzzled by this. Does anyone have any ideas?
I am completely puzzled by this. Does anyone have any ideas?