Yeah I mean the 2 rear body mounts are really bad which is why I was thinking body shifted. Other 4 look ok. Bed won't move no matter how hard I shove it. Could it be possible I've tweaked one of the frame rails slightly forward of the other?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It looks to me like the body is sitting lower than the bedDo you have a side view picture of the truck? Do all of the body lines still match up?
Yes right rear. I think there is nothing left of the metal on the body above the mount. So that's probably my issue eh?Is that right rear corner the one really bad looking mount? Last pic of the truck, first pic of your mounts - the really rusty one.
Richard
Support on cab is shot. Your not going to move this back by pushing on it. Did you run into or impact something? Like hit a tree stump or some other impact?Yeah I mean the 2 rear body mounts are really bad which is why I was thinking body shifted. Other 4 look ok. Bed won't move no matter how hard I shove it. Could it be possible I've tweaked one of the frame rails slightly forward of the other?
Best to just keep on rollin as is thenWhen one's crusty, you'll break the other mount bolts off before they ever loosen. There's probably some that are tweaked and been my experience you'll need all of them loose to move the cab around, Think the nuts inside are caged and if torn loose the cab can move again.