I didn't think it was a good idea to reuse the old clutches, that's why I selected the kit whit clutches and steels.if you are reusing clutches then just get a seal kit.... which clutches do not look good please post pics. don't get the sonnax wide band! just get a borg warner HE band and make sure your reverse input drum is flat and not dished, if not replace it.
i would also try get a corvette servo, sonnax boost valve and 3l4 springs
I will try and get a parts list together for the 3/4 clutch pack for you in the next day.
The 3-4 pack is just totally destroyed. Some clutch plates are completely stripped an bent etc... the picture doesn't do it justice.
You must be registered for see images attach
I checked the reverse input drum, its not perfect, but from what I read it's still good.
I was going to ask about the corvette servo, everybody seem to change it out. I'm just curious why is it that much better?
The "Line Pressure Booster Kit" is basically increases line pressure by adding O rings to the piston?
I assume the High RPM (3-4/FWD) Clutch Spring Kit is to replace the completely flat 3-4 springs?
You must be registered for see images attach
I updated my shopping list.
bushings
ATP Master Transmission Repair Kit
Band
GM Genuine transmission solenoid
ATP B165 Filter
PIONEER 771003
TransGo 7-2P Corvette servo piston assembly
SONNAX 4L60ELB1
High RPM (3-4/FWD) Clutch Spring Kit
Thank you.
Last edited: