Awest623
A juicy girl got me, again
However, the scanner and tach are reading the correct rpm. So I think this can be done without swapping to a 24x sensor
Sent from my Samsung S20 using Tapatalk
Sent from my Samsung S20 using Tapatalk
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Couldn't source any diodes locally. And I don't have a mailing address right now. Guess we'll see if this frys the computer tomorrow.You must be registered for see images attach
Sent from my Samsung S20 using Tapatalk
Maybe. I'm not positive but it looks like it.'03 Tahoe OS can run coil-near-plug on a 4x reluctor? If that's true I'll go coil-near-plug on my L31. I thought you needed 24x crank wheel for CNP?
Hence the Y, tahoe OS, and 56lb injectorsThe l31 express van os just uses coil 1 output for firing old style distributor.
As far as the flexfuel, you need flexfuel os, sensor, and you will need to upsize your injectors by about 30% to run e85.
Sounds like you have it all covered.
On the subject of cnp, you can't run cnp on a 4x reluctior ( not enough resolution), you will have to upgrade to a minimum of a 24x. Efi connection has one that's not to expensive. You'll have to tare down the front of you motor to change it.