If you push down on the clutch pedal and you don't feel pressure on the pedal, it's not fully bled. Some slave cylinders are really difficult and you have to bleed the crap out of them.
Did you replace the master and slave cylinder as a set? When I was a tech, that was a rule of thumb. Never replace just one, and if there's rubber hose between them, always replace it as well. Depending on your year, RockAuto sells the master/slave/hose as an assembly, already bled, for $25. https://www.rockauto.com/en/moreinfo.php?pk=11501629&cc=1031386&jsn=2540
Is there fluid leaking anywhere in the clutch system?
no fluid leaking,we pushed fluid from the bleeder to the master cylinder. The next thing we were gonna do was get a pre bled system with a new master cylinder too