Blanco_obs
I'm Awesome
So to do the Vortec head swap I need the front cover. Heads and intake manifold. And possibly convert it to efi?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
correct you will also have to use the push rods and rockers from the vortec, the reluctor ring from the vortec, and the harmonic balancer from the vortec but it does work I have done all this.So to do the Vortec head swap I need the front cover. Heads and intake manifold. And possibly convert it to efi?
Sent from my iPhone using Tapatalk
correct you will also have to use the push rods and rockers from the vortec, the reluctor ring from the vortec, and the harmonic balancer from the vortec but it does work I have done all this.
no problem, I used the computer from a 96 vortec and the whole wiring harness for a vortecThanks for the info!!!!! What computer did you use ?
Sent from my iPhone using Tapatalk
I thought all the OP wanted to do is convert the top end, TBI heads to Vortec heads. If he goes to full Vortec then he'll need a Vortec distributor, another PCM (Black box or 0411) and wiring harness too.correct you will also have to use the push rods and rockers from the vortec, the reluctor ring from the vortec, and the harmonic balancer from the vortec but it does work I have done all this.
A TBI intake will not bolt up to vortec headsI thought all the OP wanted to do is convert the top end, TBI heads to Vortec heads. If he goes to full Vortec then he'll need a Vortec distributor, another PCM (Black box or 0411) and wiring harness too.
BTW - technically the TBI is EFI also.
Yes, I know that and it was explained earlier in this thread, the options are Vortec to TBI manifold or Vortec manifold and adapter plate.A TBI intake will not bolt up to vortec heads