There's a used set on eBay now
https://www.ebay.com/itm/Cibie-H4-7...219059?hash=item23bed0eef3:g:Gv0AAOSw5wVdAXQ5
I'll save that link in case I don't like the LED 7"s I bought for the Monte. Thanks Bill!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
There's a used set on eBay now
https://www.ebay.com/itm/Cibie-H4-7...219059?hash=item23bed0eef3:g:Gv0AAOSw5wVdAXQ5
I'll save that link in case I don't like the LED 7"s I bought for the Monte. Thanks Bill!
I once had a 70 MC like yours, even same color. Bought it from a guy who said all it needed was a carb. Ha what a joke. It had a rod knock, so I rebuilt the engine in the car. I had no way to pull it at the time. It was a 300 HP 350. Well it ran good, but still kind of had a main bearing issue, so I traded it in on something else. I dont even remember what I traded it in on, it was so long ago.I got the 7" H6024 Chinese TruckLite copies put in the Monte Carlo tonight. Didn't have a whole lot of time to play with them but I did take a quick cruise after dark and snap a few pictures. First impressions are very good. The light is a little more blue than I would like, but that seems to be a common trait of most LED setups. Everything went together just fine and they were completely plug 'n play. The cut-off seems very good, especially for such a reasonable price. My pictures make the beams look a little scattered but that's mostly how I was parked I think. The driveway at my dad's angles uphill towards the garage and has a slight curve, so I wasn't parked facing straight at the door. Also I was only about ten feet off the door. The beams look much nicer out on the road. I'll try and snap some better wall pictures one of these days. Overall I'm really satisfied with them so far. The only negative was that I noticed some corrosion on my driver's side headlight plug that was causing connection issues, so I may have to replace that one of these days. Already did the one on the passenger side.
Here's a shot of them in the car with everything off. I really like the way they look.
You must be registered for see images
Low beams on.
You must be registered for see images
High beams on.
You must be registered for see images
Low beam garage door shot.
You must be registered for see images
High beam garage door shot.
You must be registered for see images
Its not the worst cutoff I've seen. Sure looks nice on the monteI got the 7" H6024 Chinese TruckLite copies put in the Monte Carlo tonight. Didn't have a whole lot of time to play with them but I did take a quick cruise after dark and snap a few pictures. First impressions are very good. The light is a little more blue than I would like, but that seems to be a common trait of most LED setups. Everything went together just fine and they were completely plug 'n play. The cut-off seems very good, especially for such a reasonable price. My pictures make the beams look a little scattered but that's mostly how I was parked I think. The driveway at my dad's angles uphill towards the garage and has a slight curve, so I wasn't parked facing straight at the door. Also I was only about ten feet off the door. The beams look much nicer out on the road. I'll try and snap some better wall pictures one of these days. Overall I'm really satisfied with them so far. The only negative was that I noticed some corrosion on my driver's side headlight plug that was causing connection issues, so I may have to replace that one of these days. Already did the one on the passenger side.
Here's a shot of them in the car with everything off. I really like the way they look.
You must be registered for see images
Low beams on.
You must be registered for see images
High beams on.
You must be registered for see images
Low beam garage door shot.
You must be registered for see images
High beam garage door shot.
You must be registered for see images
I once had a 70 MC like yours, even same color. Bought it from a guy who said all it needed was a carb. Ha what a joke. It had a rod knock, so I rebuilt the engine in the car. I had no way to pull it at the time. It was a 300 HP 350. Well it ran good, but still kind of had a main bearing issue, so I traded it in on something else. I dont even remember what I traded it in on, it was so long ago.
Its not the worst cutoff I've seen. Sure looks nice on the monte
I got the 7" H6024 Chinese TruckLite copies put in the Monte Carlo tonight. Didn't have a whole lot of time to play with them but I did take a quick cruise after dark and snap a few pictures. First impressions are very good. The light is a little more blue than I would like, but that seems to be a common trait of most LED setups. Everything went together just fine and they were completely plug 'n play. The cut-off seems very good, especially for such a reasonable price. My pictures make the beams look a little scattered but that's mostly how I was parked I think. The driveway at my dad's angles uphill towards the garage and has a slight curve, so I wasn't parked facing straight at the door. Also I was only about ten feet off the door. The beams look much nicer out on the road. I'll try and snap some better wall pictures one of these days. Overall I'm really satisfied with them so far. The only negative was that I noticed some corrosion on my driver's side headlight plug that was causing connection issues, so I may have to replace that one of these days. Already did the one on the passenger side.
You must be registered for see images