awesome information thank you so much! so a constant 12v to 85 pin on each relay, ground to 86 on each, the two wires from the remote start box for keyless entry one goes to 30 on each relay, and then 87 goes to the lock relay and do they get spliced together and then tapped into the relay or what is the easiest way? or does only one 30 pin from the relay need to be tapped into the lock relay?
1 wire from each relay will go to the corresponding wire in the lock relay. So one relay will be for lock, the other is for the unlock.
Sent from my iPhone using Tapatalk