Jay Krajniak
Newbie
That looks sweet ill follow this id love to see a write up
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
$47 x2, shows left/driver side. I’m interested and watching this to see where it goes.Heres this if someone wants to try to grapht the pockets into a 400 bumper. For $47 itd be worth a try
https://www.partsgeek.com/gbproduct...wAdeBX2hr9cD92LMxoC9ucQAvD_BwE&ad=47433952092
Oh i didnt catch that. my bad, im sure theres a passenger side on there also$47 x2, shows left/driver side. I’m interested and watching this to see where it goes.
Found this thread and wanted to revive it, love how this conversion turned out on my own truck and thought everyone should know it's actually a relatively easy one to do. The brackets on the 14 bumper are about an inch and a half wider than the original on both sides, but the holes line right up. All you need to do is build a small spacer and get some longer bolts and of course adapt the wiring harness (which I have yet to finish). Very clean look though
You must be registered for see images attach
I love the look, does it stick out the sides though? It hard to tell from that angleFound this thread and wanted to revive it, love how this conversion turned out on my own truck and thought everyone should know it's actually a relatively easy one to do. The brackets on the 14 bumper are about an inch and a half wider than the original on both sides, but the holes line right up. All you need to do is build a small spacer and get some longer bolts and of course adapt the wiring harness (which I have yet to finish). Very clean look though
You must be registered for see images attach