Texasprd
Newbie
Hello;
Searched, but definite info seems nonexistent... The power steering pump on our '95 1500 5.7 is leaking and I plan to reseal the pump, rather than get a reman or new-by-Cardone. In case of seal wear on the shaft, I'd like to have a repair sleeve available if needed. I'm having trouble finding a confirmable part number on this. NAPA shows it to be a 99076, but SKF doesn't show our truck in the application list for that number. When I look the 99076 up on other parts source sites and do a "check fit", they say it doesn't fit. The size range for the 99076 is listed as .748" - .752", so it seems compatible with the nominal 3/4" that the Saginaw pump (press-on pulley) should have.
Can anyone confirm that 99076 is indeed correct, or provide the correct sleeve number?
Thanks very much!
Searched, but definite info seems nonexistent... The power steering pump on our '95 1500 5.7 is leaking and I plan to reseal the pump, rather than get a reman or new-by-Cardone. In case of seal wear on the shaft, I'd like to have a repair sleeve available if needed. I'm having trouble finding a confirmable part number on this. NAPA shows it to be a 99076, but SKF doesn't show our truck in the application list for that number. When I look the 99076 up on other parts source sites and do a "check fit", they say it doesn't fit. The size range for the 99076 is listed as .748" - .752", so it seems compatible with the nominal 3/4" that the Saginaw pump (press-on pulley) should have.
Can anyone confirm that 99076 is indeed correct, or provide the correct sleeve number?
Thanks very much!
Last edited: