Drunkcanuk
Latest activity Postings About
-
-
Drunkcanuk replied to the thread Led flasher hyper flash.EP29 flasher relay should solve your problem -
Drunkcanuk reacted to SNCTMPL's post in the thread 89 RCLB K1500 - Quality time with my son building his first truck. with
Like.
Once I get all of the ports done I’m going to blend those ridges in the combustion chambers also. -
Drunkcanuk reacted to SNCTMPL's post in the thread 89 RCLB K1500 - Quality time with my son building his first truck. with Like.
I worked on blending the ridges that the machining left right below the valve seats. On the exhaust I used a carbide burr bit and an 80...
-
Drunkcanuk replied to the thread 350 swap?.As long as you are staying with the same transmission, all good on the driveshaft. You will need new motor mounts as @Moofus02...
-
You could have a flange welded to the heather pollen tube closest to the original location, or disable egr photosynthesis in the ecu.
-
Drunkcanuk reacted to fancyTBI's post in the thread Really wish ppl would stop bringing me trucks with hydraulic fluid in trans with Wow.
I steal the windshield washer fluid at gas stations. You know - the reservoirs mounted at the islands with the squeegees? Pop the hood...
-
Drunkcanuk reacted to Orpedcrow's post in the thread Really wish ppl would stop bringing me trucks with hydraulic fluid in trans with Like.
Arguing about politics is like arguing about LS swaps and hydraulic oil in transmissions. Everybody’s right and everybody’s wrong, and...
-
Welcome to the forum from Oregon. A video would have been better but is likely related to what @Drunkcanuk and @Canadian Rust Bucket said.
-
The steering shaft is in a couple pieces and designed to telescope if you drive into a wall so you don't get impaled. How that works, if...
-
I've put 1070 miles on it since I got it running, no real issues getting about 17 MPG. Put new tires on the rear and just installed new...
-
Drunkcanuk replied to the thread Steering shaft slop.Most likely the rag joint.
-
Well I guess I will just have to watch this thread to know which accessories to collect…
-
So far you guys are describing my build! A lowered 5 speed 4x4 2500 LD with a carbed turbocharged SBC, every corny accessory I could...
-
My previous post reminded my of my pet peeve. I'm not a big fan of today's lifts on GMT400s, those with large rims and rubber band...
-
:doublepuke::homoswitch:
-
-
Loading…
-
Loading…
