Tim W
I'm Awesome
Iv been chasing a few pesky oil leaks on my truck (97 5.7 block thats in a 94 1500) . I solved the majority of them over the few years.
1. I replaced the cork valve cover gaskets with fel pro Rubber gaskets.
2. Relaced the valve covers with a high quality aluminum valve covers from clay smith cams
3. Installed the Felpro problem solver gasket when the new intake manifold was installed
4. Replaced the rear main seal
5. Replaced the front timing cover gasket.
I still have a small oil drip that forms on my starter and sometimes on my Transmission bell housing. The drip is small enough that it doesnt drip on the ground. Its just annoying.
The only two things i havent replaced are the oil pan gasket (that appears to the dry unless its leaking at the rear near the starter)and the oil pressure sender adapter (the brass fitting). Im not sure of the proper name.
The distributor is new along with its gasket, but, I guess new doest always mean good.
Im really hoping its not coming from the back of the intake manifold. I really dont wana pull that off. From what i can tell it seems dry back there.
For what its worth I run Amsoil 10W 30. I guess I could go up to 10w 40 but to me, thicker oil is a band aid and not the fix.
Any other thoughts?
1. I replaced the cork valve cover gaskets with fel pro Rubber gaskets.
2. Relaced the valve covers with a high quality aluminum valve covers from clay smith cams
3. Installed the Felpro problem solver gasket when the new intake manifold was installed
4. Replaced the rear main seal
5. Replaced the front timing cover gasket.
I still have a small oil drip that forms on my starter and sometimes on my Transmission bell housing. The drip is small enough that it doesnt drip on the ground. Its just annoying.
The only two things i havent replaced are the oil pan gasket (that appears to the dry unless its leaking at the rear near the starter)and the oil pressure sender adapter (the brass fitting). Im not sure of the proper name.
The distributor is new along with its gasket, but, I guess new doest always mean good.
Im really hoping its not coming from the back of the intake manifold. I really dont wana pull that off. From what i can tell it seems dry back there.
For what its worth I run Amsoil 10W 30. I guess I could go up to 10w 40 but to me, thicker oil is a band aid and not the fix.
Any other thoughts?
Last edited: