BOTTLEDZ28
I'm Awesome
Fellow Ma$$hole here who is going to be doing an LS swap in my 98 2 door 4x4 this spring. Looking back on this swap you did and knowing now how much these swaps have advanced, what would you do different if you did this swap again?
My biggest issue is deciding which direction I want to go in with the wiring side of things. Some say to repin the stock harness and use a 411 PCM and then I see thread where guys have stand along harnesses made or they modified a GEN 3 harness. Im in Westport Mass which is down near FallRiver, Not sure how far you are from me but I would love to check out your truck as well as Mikes shop.
Brad
My biggest issue is deciding which direction I want to go in with the wiring side of things. Some say to repin the stock harness and use a 411 PCM and then I see thread where guys have stand along harnesses made or they modified a GEN 3 harness. Im in Westport Mass which is down near FallRiver, Not sure how far you are from me but I would love to check out your truck as well as Mikes shop.
Brad