Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Push on one side of the clip and pull the line off. Here’s the clip on a newer truck, skip to about 0:35Any idea how to get those factory clips off? I tried with no luck.
Not sure that will fix your rough idle. May want to spray some carb cleaner around all joints of the intake. First shoot a little into the intake air stream to see if it smooths the idle. If it does then start going around the joints and along the rails where the intake meets the heads. EGR valve sticking or jammed open with carbon will cause a rough idle too.Definitely. That's the plan. I don't have emissions in my county. So it's not crucial, but I hate looking at it. Also I'm chasing a rough idle, so I'm trying to fix everything I can.