Members

Moparmat2000

I'm Awesome From Grand Tetons

Joined: Feb 13, 2016

Last seen: Yesterday at 10:15 PM

Latest activity Postings About

- Moparmat2000 reacted to termite's post in the thread Custom made shop tools with Like.
  
  Looks nearly identical to one I was given short wesr on the shoes. Mine was made by a farrier with used shoes he cleaned up in a shot...
  
  Wednesday at 12:08 PM
- Moparmat2000 replied to the thread Custom made shop tools.
  
  Not a shop tool, but wife wanted a unique wine rack. Bottles purposely angled down to keep corks wet. Bought 12 "00" horseshoes from...
  
  Wednesday at 7:18 AM
- Moparmat2000 reacted to Erik the Awful's post in the thread Custom made shop tools with Like.
  
  Tinker
  
  Saturday at 3:39 PM
- Moparmat2000 replied to the thread Custom made shop tools.
  
  Altus OK ?
  
  May 10, 2024
- Moparmat2000 reacted to Erik the Awful's post in the thread Custom made shop tools with Like.
  
  We started putting bolt marking compound on the voltage adjustment on our generators because some of the crew chiefs would tweak the...
  
  May 10, 2024
- Moparmat2000 reacted to Erik the Awful's post in the thread Custom made shop tools with Like.
  
  Many years ago the A/C broke in our hangar in early July. CE said they didn't have the budget to replace the A/C unit until the new...
  
  May 9, 2024
- Moparmat2000 replied to the thread Custom made shop tools.
  
  The belt loader truck at our station has 2 service doors on the side right next to one another. One for fuel and one for hydraulic...
  
  May 9, 2024
- Moparmat2000 replied to the thread Custom made shop tools.
  
  We were "gifted" a "new" to us lav service truck for our station. Ford 2.3L fuel injected, automatic trans. I say new to us because the...
  
  May 9, 2024
- Moparmat2000 replied to the thread Custom made shop tools.
  
  That sounds sooo typical. A buddy of mine was a senior master sergeant running the local AFB GSE dept, and the waste that the military...
  
  May 9, 2024
- Moparmat2000 reacted to Erik the Awful's post in the thread Custom made shop tools with Haha.
  
  The Navy was that way when I worked GSE as a contractor. We had a mish-mash of equipment. We had four B-5 stands on order for years, and...
  
  May 9, 2024
- Moparmat2000 replied to the thread Custom made shop tools.
  
  Civilian use. Our pickup trucks, and the 2 company vans are gasoline too. We get what they give us to use. We go through their parts...
  
  May 9, 2024
- Moparmat2000 reacted to Supercharged111's post in the thread Custom made shop tools with Like.
  
  I made this little shelf dealie out of a couple 2x4 scraps and some scrap plywood. Helps with floor space.
  
  May 9, 2024
- Moparmat2000 reacted to Stumpy's post in the thread Custom made shop tools with Like.
  
  Threw this setup together fairly quick, to help with the transmission swap. Took the pad off the jack, then drilled and tapped two...
  
  May 9, 2024
- Moparmat2000 replied to the thread Custom made shop tools.
  
  So I made this for the GSE guys for their battery charger and battery related stuff out of 1" square tube, and 1" angle. The hooks are...
  
  May 9, 2024
- Moparmat2000 replied to the thread Custom made shop tools.
  
  Rack installed and loaded up
  
  May 6, 2024
Show older items
Loading…
Loading…