Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Been in the same predicament for a while now. Only thing I can find is this but I don't know if those are for the diff assembly, the removable brace on the passenger side (the thing in your one photo), or both. There's almost no info about this online but seeing this post is making me want to figure it out lol
Be careful with the aluminium housing. I pulled one with 3.73s so I'd only have to mess with the rear diff when I swap from my factory 3.42 gearing, and I broke the case trying to remove the bushings. Definitely need to brace the housing when trying to drive out the bushingsand measure the ones on my diff
These are the diff bushings.https://www.rockauto.com/en/moreinfo.php?pk=10372812&cc=1303614&pt=10403&jsn=415Know thos is an older thread but anyone have a good way to replace these bushings?? My 89 for referenceYou must be registered for see images attach
I used a ball joint pressKnow thos is an older thread but anyone have a good way to replace these bushings?? My 89 for referenceYou must be registered for see images attach