Recent content by Z71hamric
-
Z
94 c1500 4l60e to th350 swap
I have a 94 c1500 extended cab with a built 350 this truck will not be drove on highway much maybe just around town. Mostly at the track. This motor is already converted to carb so I'm not worried about it messing with the tbi. I have a built th350 trans with 9" tailshaft and a 3000 stall...- Z71hamric
- Thread
- Replies: 1
- Forum: Transmissions
-
Z
cutting out at 3000 rpm clears up around 4000
Both if you slowly accelerate its not as bad but you can still feel it cutting out. When you put it to the floor it cuts out bad around 3000. If you let off the gas then floor it real quick it clears out for just a second then starts cutting out again. Once get over 3800-4000 rpm it clears out- Z71hamric
- Post #4
- Forum: Engine Performance + Maintenance
-
Z
cutting out at 3000 rpm clears up around 4000
I have a 94 extended cab i recently built a 350 with flat top pistons rolling thunder edelbrock roller cam old 300horse heads torker2 intake 750 edelbrock carb. I ranthis same setup in my small dirt drag truck minus the roller cam and it ran great. Im running an electric fuel pump with a holley...- Z71hamric
- Thread
- Replies: 4
- Forum: Engine Performance + Maintenance
