heskahoka's latest activity
-
heskahoka replied to the thread TBI still missing, failed emissions, code 34....What about spraying carb or brake parts cleaner to look for a potential vacuum leak? -
heskahoka reacted to L31MaxExpress's post in the thread TBI still missing, failed emissions, code 34... with
Like.
TBI base gasket or intake gaskets can both fail and leak causing a vacuum leak and a rough idle. -
heskahoka reacted to rob249's post in the thread TBI still missing, failed emissions, code 34... with Like.
Due to the unknown age of my MAP sensor, I opted to just replace the thing. I double checked the VAC line, and broke the last OEM hard...
-
heskahoka reacted to PlayingWithTBI's post in the thread Side Molding Option Route LA Custom Parts with Like.
Damn, wish I knew about them before I did my truck! The price is good too, since the emblems are included. I wound up paying ~$310 for...
-
heskahoka replied to the thread Side Molding Option Route LA Custom Parts.I used these guys for my new molding. They are great. I changed the molding and emblems to a red theme and it looks sharp. Their...
-
-
heskahoka replied to the thread My Flat Tappet Cam Wiped Out So I Decided To Go Roller.Another question: Do you really need the more power and torque from a 383? I love updated and stroked motors and cool guy parts, but...
-
So in 2021, I go this 96 extended cab Chevy. Wouldn’t pass smog, had issues with the battery, turn signals, brakes lights and emergency...
-
heskahoka replied to the thread TBI still missing, failed emissions, code 34....Check and recheck your vacuum line for cracks/leaks from the MAP the to throttle body. I like to use zip ties on mine just to be sure...
-
heskahoka reacted to GoToGuy's post in the thread TBI still missing, failed emissions, code 34... with Like.
Do you still have vacuum line routing decal stuck on the radiator top support under hood? If not look in service manual for line...
-
heskahoka replied to the thread What brand batteries are the longest lasting..I concur with the Odyssey batteries. I had one in my Grand National for 8 years with no issues. It was getting a little slow to crank...
-
heskahoka reacted to L31MaxExpress's post in the thread My Flat Tappet Cam Wiped Out So I Decided To Go Roller with Like.
Long story short my buddy is going to try a new internal harness, shift solenoids and the MPS before the trans comes out. I think you...
-
heskahoka reacted to PlayingWithTBI's post in the thread My Flat Tappet Cam Wiped Out So I Decided To Go Roller with Like.
I already have new fast burn heads (after the valve job) that flow better than Vortecs and a roller cam who's power curve is 2000 - 6500...
-
heskahoka replied to the thread My Flat Tappet Cam Wiped Out So I Decided To Go Roller.This. -You write the check once and get nearly everything you wanted. -You are already familiar with the TBI setup and layout. -You have...
-
Old alarm led
