Members

dvc_nb2

Newbie From WA

Joined: Aug 8, 2022

Last seen: Yesterday at 10:05 PM

Latest activity Postings About

- D
  
  dvc_nb2 reacted to bagged92sdime's post in the thread Lowering 92 K1500 Z71 with Like.
  
  Been a while since I posted here, but I finally lowered my truck a bit... Western Chassis torsion keys, shackles and hangers. The...
  
  Friday at 3:45 AM
- D
  
  dvc_nb2 reacted to Jeepwalker's post in the thread USA-Made ...Or your pick for quality windshield? with Like.
  
  Are the OER windshields decent quality? I see places like Summit & LMC selling them. Are they made in China or ...anybody tried them...
  
  May 28, 2023
- D
  
  dvc_nb2 reacted to 1badgmc's post in the thread Shaving Tails & Replace With LED Strips? with Like.
  
  Absolutely! My wires are run into the lower corners of the tailgate on both ends right near the pivot point. That way there's not...
  
  Apr 8, 2023
- D
  
  dvc_nb2 reacted to HotWheelsBurban's post in the thread Factory White - Single Stage or 2 Stage? with Like.
  
  IIRC somewhere around the time the 400s were introduced, GM changed to basecoat/clear coat type paint. In my experience, we had a '90...
  
  Apr 7, 2023
- D
  
  dvc_nb2 reacted to 81nascar's post in the thread Stepside beds and dually fender repair. SMC not fiberglass.. with Like.
  
  You can use the West Marine epoxy system to fix them. It works well. Can even make a filler out of it.
  
  Apr 7, 2023
- D
  
  dvc_nb2 reacted to jgreen16's post in the thread Stepside beds and dually fender repair. SMC not fiberglass.. with Like.
  
  I never knew that the stepsides were fiberglass, LOL. And I owned one briefly.
  
  Apr 7, 2023
- D
  
  dvc_nb2 reacted to justme1121's post in the thread GMC or Chevy Grille? with Like.
  
  Check out my ride frame off 5x7 drop custom paint 350 all done by me Sent from my iPhone using Tapatalk
  
  Apr 7, 2023
- D
  
  dvc_nb2 reacted to Jermu's post in the thread GMC or Chevy Grille? with Like.
  
  You sure can with a little bit of work :naughty:
  
  Apr 7, 2023
- D
  
  dvc_nb2 reacted to 99caddymess's post in the thread Fender flare holes with Like.
  
  Hello, I just recently picked up a SUPER clean 1999 gmc k2500 ccsb. The truck doesn't have an ounce of rust on it but it has those...
  
  Apr 1, 2023
- D
  
  dvc_nb2 reacted to Bob L's post in the thread Door Gap with Like.
  
  Kenny is right on bending to fit. If your body lines at the rear line up with the rear panel height is right. To check if a door is...
  
  Mar 28, 2023
Show older items
Loading…
Loading…