Scotty.92
I'm Awesome
I need some advice on where to go with this. I am having wiring issues since I have removed my command start and just getting it all back together now. The only thing different I have done on my truck from working 100% right and where I am now, is I have removed dash, and cut old wires out - soldered wires back together on steering column between the wheel and near the base of the wheel where a 7mm holds a connector (Almost like a fuse block but only connects wires like a quick connect)
This truck is a 1998 so it has VATS, but that issue is figured out. What the truck is currently doing, is when I press my brake pedals my wipers go on full speed, when I press brakes - both turn signals on gauge cluster go on, high beams are on constant any time battery is hooked up, turn signals do not work.
I had to solder every wire on the harness for column (Probably 30 wires or so?) I am sure I got every color wire back to the same wire as before. Might be small chance because were a couple of same color but I checked. Still might be possibility though.
I have also noticed there is one plug that I have not plugged back in because I cant find where it plugs into. It is a blue connector with 5 wires on it. Colors in order of appearance - Black, orange, pink, light green, and brown. I am not sure what this is for. I cant see from factory just leaving it unplugged so it must go into something? I checked and could not find anything else it would go to. It is under dash near steering column and in same wire loom as a bunch of air bag wires ( Yellow loom)
Being a 98 with vats, can I use any other year steering column to replace it with? My shifter bracket is also broken so might have to get new column.
This truck is a 1998 so it has VATS, but that issue is figured out. What the truck is currently doing, is when I press my brake pedals my wipers go on full speed, when I press brakes - both turn signals on gauge cluster go on, high beams are on constant any time battery is hooked up, turn signals do not work.
I had to solder every wire on the harness for column (Probably 30 wires or so?) I am sure I got every color wire back to the same wire as before. Might be small chance because were a couple of same color but I checked. Still might be possibility though.
I have also noticed there is one plug that I have not plugged back in because I cant find where it plugs into. It is a blue connector with 5 wires on it. Colors in order of appearance - Black, orange, pink, light green, and brown. I am not sure what this is for. I cant see from factory just leaving it unplugged so it must go into something? I checked and could not find anything else it would go to. It is under dash near steering column and in same wire loom as a bunch of air bag wires ( Yellow loom)
Being a 98 with vats, can I use any other year steering column to replace it with? My shifter bracket is also broken so might have to get new column.