hzemall
Newbie
I am ripping out my TBI system and going with the FAST EZ EFI system but still need to use the 4L80E as a stand alone system. How do I wire that up using the stock ECM and other parts?
Thanks
Thanks
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
you can't, the only ecm capable of doing that was the 1992/93 ecm from a 6.5 diesel, you need a aftermarket controller like tciI am ripping out my TBI system and going with the FAST EZ EFI system but still need to use the 4L80E as a stand alone system. How do I wire that up using the stock ECM and other parts?
Thanks
you cant, the only ecm capable of doing that was the 92/93 ecm from a 6.5 diesel, you need a aftermakret controller
If I get that ECM, what do I do? Got a part number for that ECM by chance?
i'll have to look for the # as actually i am pretty sure i have one i was keeping around in case i decided to go to a mechanical pump on my 6.5, as far as wiring one i would check on dieselplace in the 6.5 section or transmission section
Thanks......I'm starting to think I might have to buck up for a stand alone system