I changed the wiper motor and now my wipers work, but they only work when on high. And you have to catch them at the bottom of the windshield and turn it off quickly so they can stay down there. What could be the problem? Please help
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Have you changed the wiper module?I changed the wiper motor and now my wipers work, but they only work when on high. And you have to catch them at the bottom of the windshield and turn it off quickly so they can stay down there. What could be the problem? Please help
I meant wiper control board. It’s next to the motor. If your wiper motor came with a new one then maybe the switch in the column is bad.I thought with getting a new wiper motor the new module would work just fine.
That’s the one I’m talking about. Mine doesn’t click at every position anymore.in fact the only failure I've personally observed is one that the switch physically broke so it didn't have any separate positions anymore, just spun back and forth freely.
What caused you to start this maint' action? What was happening?I changed the wiper motor and now my wipers work, but they only work when on high. And you have to catch them at the bottom of the windshield and turn it off quickly so they can stay down there. What could be the problem? Please help