Will this work?

[TheClev.z71]

315/75/16 on stock? If I crank? Thought I'd ask

 

[Horns]

It'll fit, but it will rub like no other, and you'll just kill front end parts with it cranked that much.

 

[ChrisAU]

Only with max crank and you will rub a LOT, and you will absolutely eat front end parts. Will cost you $300/yr in front end parts min. Thats if you do them yourself.

 

[outalne94z71]

Only with max crank and you will rub a LOT, and you will absolutely eat front end parts. Will cost you $300/yr in front end parts min. Thats if you do them yourself.

i had 35's on mine with it cranked so far it ripped through the bump stops and a body lift with just a slight bumper trim and i never went through a bunch of parts, worst thing it did was loosen up the upper ball joint and i would have to peen the top of the joint back down to tighten it up

 

[dcZ71]

315 km2 will fit easy. and if you trim a little on the valance you wont have to crank much. Do it!