96greenmachine
Newbie
I have a 1996 c2500, the engine is a 5.7L 350SBC(The L31) I’ve been doing some research and found a good deal on a cam. The part number from Comp cams is cl12-676-4. The specs are
230/236 @.050
110 LSA
.488/.501 lift
I know the lift is high for stock heads so I will be doing some springs, retainers, and 1.6 roller rockers. I’m just trying to see if anyone has any advice on whether or not this cam will work with the engine, or a better option for a cam. I’m not worried about the tuning because I’m going to do the 0411 PCM swap and have it tuned, but I am worried about whether or not the stock intake will be able to keep up with the new mods? Or if I should be looking to replace anything else while I’m doing the cam
230/236 @.050
110 LSA
.488/.501 lift
I know the lift is high for stock heads so I will be doing some springs, retainers, and 1.6 roller rockers. I’m just trying to see if anyone has any advice on whether or not this cam will work with the engine, or a better option for a cam. I’m not worried about the tuning because I’m going to do the 0411 PCM swap and have it tuned, but I am worried about whether or not the stock intake will be able to keep up with the new mods? Or if I should be looking to replace anything else while I’m doing the cam