Which truck gets the 18x10's?

[JScott23]

So it looks like these rims/tires are going to need some spacers up front to eliminate rubbing completely but it looks like they're going to work....

now the bigger question, which truck?

You must be registered for see images attach

 

[96k1500]

If I'm seeing it right spacers will make them rub worse

 

[JScott23]

The only clearance issues i was having was the sway bar when turning... i just need to get them away from the truck a little bit.

 

[98_k1500]

I see what you are talking about, they are not bolted up to either truck, they are just sitting beside the tires that are on the truck.

 

[JScott23]

Yeah i just wanted to kinda see what they looked like. I've ran 285/75/16's on both trucks which are 31" tires and they fit with no rubbing... but these are wider rims on 285/60/18's which are 31.2" tall so i'm assuming if i run some spacers we'll be okay. I'm hoping i can get away without but we'll see.


It just looks like they wont fit because of the angle

 

[thz71]

Crew cab!

 

[JScott23]

Yeah we'll see how they end up fitting. The C2500 is levelled and the C3500 has less of a turning radius so we'll just see which causes less rub and how we can avoid rubbing. lol