wheel/tire deal not sure.......

[97DD]

im fairly new to the OBS so i was just wondering if i could fit these on my truck. i found a wheel and tire deal for 4 pro comp rock crawler 97's that are 15x10 with 3.75 backspacing and goodyear wrangler duratracs that are 33x12.5x15 for 700.

i got a 97 ecsb z71 with a 2'' block crank. sits level now with pretty good cv angles.

1) will the 15 fit?
2) I already ordered my 3" body lift so will there be to much of a gap for the 33's and the fenders once i put it on?

i tried to run a tape measure and see where they would sit hieght wise but can't really see in my head what it would look like.

any info would be appreciated.

 

[phule]

I've got a pic on my tablet of a white ecsb with 3" bl 33s on 16x10s I think it looks perfect. I'll grab it when I get home

Adam

 

[SCOTTYINWV]

I would probably ditch the block and crank down to level. Then add the body lift with the 33s.

 

[97DD]

i do have a 1 1/2" block that i was thinking bout putting on and decranking when i do the BL. honestly the cvs as of right now arent to bad. but I know I could get better front end life with a little less crank.

 

[phule]

You must be registered for see images

I believe this is a 3" bl 305/70r16 on 16x10s

Sent from my Kindle Fire using Tapatalk 2

 

[97DD]

NICE!!!

 

[SCOTTYINWV]

That looks great!

 

[southern_z71_92]

This is block and crank with the 3 inch body lift. With id say the same wheel dimensions. 15x10s stick out just a bit and 33/12.5/15 nitto trail grappler m/t

You must be registered for see images

Sent from my GALAXY S5 wrapped in an otterbox

 

[97DD]

thanks guys. Im definitely gonna pull the trigger on the wheel/tire deal now. southern, your truck is what I was hoping to achieve.