What lift and does anybody recognize this Yukon?

[454cid]

97 Yukon coming up for auction locally.... supposedly out of Colorado. It's been modified a bit...roll pan, after market front smoothy bumper, painted grill, aftermarket exhaust, K&N FIPK, Denali seats and door panels, lifted.... Hello Kitty (Why???) license plate frames and a couple of other little dodads.

I'm wondering if anyone knows the truck, and what lift it's got.

Here are some pictures. I didn't grab any of the rear, as it's just blocks.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Nad_Yvalhosert]

The torsion bar drop brackets look like my Rough Country lift. Mine's a 6", your pics (specifically the front LCA drop brackets)
look like a 4".

 

[Zerio29]

The torsion bar drop brackets look like my Rough Country lift. Mine's a 6", your pics (specifically the front LCA drop brackets)
look like a 4".

maybe an older Rough Country lift? I bought one a few years ago and they look nothing like that.

And the rough country lift is exactly the same between the 4" and 6" in the front end components - including the drop brackets.

 

[b454rat]

i'd have to look at mine again, but looks similar. I thought maybe a Rancho cause it has shocks (which doesn't mean squat) and steering stabilizer. But there is a brace that goes between the draglink and frame. I called someone and when mentioned that immediately said Rancho. It's coming off for an SAS.

 

[DonYukon]

Didn't RC have a 3 inch kit or something years ago that caused a bit of problems? I don't think that's a 4-6 inch kit the lower control arm brackets look completely different from what I remember.

 

[454cid]

Here's a couple more pictures.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[b454rat]

Forgot had pics on my phone, drop down brackets don’t look anything like mine

You must be registered for see images attach

You must be registered for see images attach

 

[454cid]

Didn't RC have a 3 inch kit or something years ago that caused a bit of problems? I don't think that's a 4-6 inch kit the lower control arm brackets look completely different from what I remember.

Maybe 3"..... I think the tires are only 285s. What was the issue with that lift?

 

[DonYukon]

Maybe 3"..... I think the tires are only 285s. What was the issue with that lift?

I dont remember exactly I just remember something about bump stops and or CVs making contact with the shocks. that and I definelty remember there was a "creaking" problem much like the first gen Superlift kits had