Upper radiator hose getting pressure when cold?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

454cid

Sooper Pooper
Joined
Sep 5, 2010
Messages
8,192
Reaction score
9,339
Location
The 26th State
The radiator is in communication with the block via the bottom hose so the pump sees an open path (assuming a clear radiator - which appears to be the case).

True, I didn't think of the lower hose.... outa site sotta mind, I guess.

As mentioned earlier, pressure is from heat - or gasses escaping the engine.

I understand, but I'm talking about a cold engine.
 

Pinger

I'm Awesome
Joined
Mar 10, 2020
Messages
3,067
Reaction score
6,056
Location
Scotland.
I understand, but I'm talking about a cold engine.
In that case, if it's a leaking head gasket, the coolant should have a smell of gasoline what with the mixture being so rich on cold start.
 

454cid

Sooper Pooper
Joined
Sep 5, 2010
Messages
8,192
Reaction score
9,339
Location
The 26th State
I put the pressure tester on it today, and I had to let it run a couple of minutes before the needle started moving, and when I removed it, the coolant was warming. I still may do the chemical test, just to verify further that I'm fussing over nothing.
 

someotherguy

Truly Awesome
Joined
Sep 28, 2013
Messages
10,204
Reaction score
15,271
Location
Houston TX
If there's no trail of bubbles going to the reservoir when the engine is fully warmed up and running, I wouldn't sweat it. Slow warm-up probably is a bad thermostat, stuck open.

Richard
 

Latest posts

Forum statistics

Threads
64,800
Messages
1,400,898
Members
52,490
Latest member
jeraldinmendez
Top