ChicagoSteve
Newbie
First, thank you to all that have helped me in my very first thread...amazing advice...
Scenario:
Took TBI motor out of my 92' K1500, put in 350 (4 bolt main), has 305 heads (416 cast-it came like this from a buddy of mine). Carb:. Edelbrock 1405 manual choke. Intake: Edelbrock Performer EPS #2701, Cam: unknown, Pistons: unknown, Valves: unknown----yea it sucks!
Distributor: MSD StreetFire (has been put in at TDC-tach and battery wires swapped and installed) Lined the oil pump shaft a bit advanced so when I installed the distributor, the rotor button and shaft were aligned with number one cylinder. I fired it up last night...and could hear back fire in the exhaust as it bogged and died...it also back fired through the carburetor twice...one hell of a flame.
Question:
Do I have to unplug any wires from the computer from the old computer controlled distributor? External pickup coil has been removed as well because the StreetFire has the internal one. Am I missing any steps? I know I have to adjust the dizzy...but which way?
All help is greatly appreciated! Thanks again to all!
Scenario:
Took TBI motor out of my 92' K1500, put in 350 (4 bolt main), has 305 heads (416 cast-it came like this from a buddy of mine). Carb:. Edelbrock 1405 manual choke. Intake: Edelbrock Performer EPS #2701, Cam: unknown, Pistons: unknown, Valves: unknown----yea it sucks!
Distributor: MSD StreetFire (has been put in at TDC-tach and battery wires swapped and installed) Lined the oil pump shaft a bit advanced so when I installed the distributor, the rotor button and shaft were aligned with number one cylinder. I fired it up last night...and could hear back fire in the exhaust as it bogged and died...it also back fired through the carburetor twice...one hell of a flame.
Question:
Do I have to unplug any wires from the computer from the old computer controlled distributor? External pickup coil has been removed as well because the StreetFire has the internal one. Am I missing any steps? I know I have to adjust the dizzy...but which way?
All help is greatly appreciated! Thanks again to all!