The previous owner of my truck cobbed together the fuel lines on my truck so now they go from metal to rubber to metal back to rubber several times. I've already had to replace and retighten hose clamps numerous times to stop leaks and other issues. I was fed up with it and found a good deal on some pre bent lines so I ordered them but now i'm a little confused. The lines I received are for the supply and return lines and they are hard metal lines but they are fairly short. They also supplied me with two rubber flex hoses with threaded ends on both sides and I'm not sure exactly where these hook up. My question is how exactly are the stock oem fuel lines ran?
Does it go from the metal hard lines on the sending unit to rubber flex lines back to hard lines all the way up to the tbi unit? Or is there another section of rubber flex hose in the mix before you reach the tbi unit? I just want to get truck buttoned up before winter and this is one of the last "projects" I'm tackling and I just want to make sure I've got all the parts I need.
Thanks guys
Does it go from the metal hard lines on the sending unit to rubber flex lines back to hard lines all the way up to the tbi unit? Or is there another section of rubber flex hose in the mix before you reach the tbi unit? I just want to get truck buttoned up before winter and this is one of the last "projects" I'm tackling and I just want to make sure I've got all the parts I need.
Thanks guys