Revelator 14” disc brake conversion 2WD

[fastfreddys454ss]

Here are some of the requirements and basic info before before you can do the conversion

You must be registered for see images attach

 

[fastfreddys454ss]

When i started on the pro pro performance revelator disc conversion. I Didn’t like the cast grey on the caliper. So I sprayed them red. Not everyone needs a step by step, but it’s nice to use as a reference.

You must be registered for see images attach

You must be registered for see images attach

 

[fastfreddys454ss]

The kit shows to remove the spindle, but I can do it without removing it. Drilled out two of the brake shield holes for the caliper bracket with a 3/8s bit.

You must be registered for see images attach

 

[fastfreddys454ss]

Tapped both holes with a 7/16-14 tap

You must be registered for see images attach

 

[fastfreddys454ss]

Put the hub on to see if everthing fit. I had to use the spindle nut off the belltech spindle. The one the came with the kit had the wrong thread. It may be different now. Still it’s good to keep the old parts just in case.

You must be registered for see images attach

 

[fastfreddys454ss]

Next, I had to trace the caliper mounting bracket with it bolted on to get ready to cut the ears off the spindle.

You must be registered for see images attach

You must be registered for see images attach

 

[fastfreddys454ss]

Cut the tabs off my spindle. Make sure you use a 6” cut off wheel on your hand grinder. 4 1/2 disc is too small.

You must be registered for see images attach

You must be registered for see images attach

 

[fastfreddys454ss]

Mock up

You must be registered for see images attach

 

[fastfreddys454ss]

Make sure you use the correct rotor center ring

You must be registered for see images attach

 

[fastfreddys454ss]

At this point Make sure you use the correct caliper shims included in the kit. So you have equal pad spacing on both side of the rotor. Last pic is just an example of rotor to pad spacing

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach