Motor is in the frame. Good clearance all around. The exhaust and engine harness are also on but got dark. Tranny gasket will be here Monday so I can install it. 4wd to 2wd swap is done.
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Then we will complain about freezing our balls off. No one wins.
Its easier at the moment till you start trying to put things together and the dont fit. But yea its much easier running all the lines wires and exhaust with nothing in the way.Honestly this looks like the easy way to do the swap. I've heard from others who've done the swap and wouldn't wish it on their worst enemy. With all the **** out of the way making things fit must be 100x easier.