LT1and 4L60E Swap pics

[91blkstpsd]

Just thought I'd post a few pics of when I did my LT1 and 4L60E swap in my 91.
BEFORE: Tired old 350 TBI and 700R4

You must be registered for see images attach

Engine and trans are from a 95 Camaro. I installed LT4 Hotcam, 1.6 Roller Rockers, 52mm TB, Mid length ceramic headers, Moroso 6qt oil pan, Aeromotive FPR, and other odd and ends. Then powdercoated my intake, brackets, and mics stuff. Had some valve covers modified to fit and added Corvette fuel rail covers. Trans was rebuilt with Transgo shift kit, servo, 2200 TCI stall (soon to change to 2800), and bigger pan.

Had to notch the frame since Im running an AC delete pully.

You must be registered for see images attach

Went ahead and painted the firewall while everything was apart.

You must be registered for see images attach

Yay wiring! not

You must be registered for see images attach

Used the factory distribution block and cut it in half. One side is now hot and the other side is switched power.

You must be registered for see images attach

I lengthened some wires and was able to run the ECM inside where the factory one was. Also cleaned up as much wiring as I could and hid it.

You must be registered for see images attach

This is what it looks like as of now. I still have a list of things I want to do to it but it just takes time.

You must be registered for see images attach

 

[///RAGMC]

Nice job Im looking for a set of those valve covers where did you get them from

 

[DRAGGIN95]

Looks great, clean and simple!

 

[91blkstpsd]

Nice job Im looking for a set of those valve covers where did you get them from

Thanks. I got them off ebay. I had to notch the passenger one to clear the alt on the LT1 though.

Looks great, clean and simple!

Thanks! Its going to be even more so before Im done with it.

 

[Bigg G]

Looking good and I've been considering that swap.....
be sure to post more details on what other mods you did to get everything working.