"ls swap" fuel pump with TBI 350?

[TylerZ281500]

if your using the ls pump you need a regulator no matter what. tbi cant run that kind of pressure

 

[LOWnEASY]

I was under the imprison the throttle body its self had the regulator built in? its all good though. I'll just pull the bed twice

 

[TruckinThruTEXAS]

What adapter mounts did you buy?

Sent from my SGH-M919 using Tapatalk

 

[Horns]

I would rather not spend the extra money on a regulator when I could be spent on other small parts. And also, the lines from the filter up are steel lines.
Guess I'll ether wait to put the flip on or pull the bed twice...

Honestly this would be best. Why run the expensive pump using it up for an application where it's not needed? Save it for when it is needed. Pulling the bed isn't that hard, especially if you're doing it now, and you antisieze everything, it will be easy the second time.

I was under the imprison the throttle body its self had the regulator built in? its all good though. I'll just pull the bed twice

It does, but not one rated for that kind of pressure.

 

[LOWnEASY]

What adapter mounts did you buy?

Sent from my SGH-M919 using Tapatalk

EBay mounts 1" set back.