Lets see them CB's

[bullas1022]

Lets see your CB radio and antenna set ups. I'm mostly interested in radios In 88-94 interiors.

 

[HankHill_K2500]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Uniden Pro 505 XL mounted under my custom cup-holder ran to one 4ft top-loaded antenna, the other one is just for show. SWR of 1.5 on channels 1 and 40 and lower on the channels in between. Top picture is missing the SWR meter and the microphone, dont have an updated pic on me...

 

[bullas1022]

Nice how did you mount the CB to the cup holder?

 

[HankHill_K2500]

Outlined the holes in the CB bracket for where I wanted to put the screws near the lowest part of the underside of the cup holder. Used just a stove bolt with a washer and put it through the holes I drilled. Might not be as easy with the factory cupholder because mine is made of wood so Im not too sure how the plastic is on the stock. Ill be away from my truck for another week and a half but could get some pictures then if you'd like.

 

[bullas1022]

I didn't even notice yours was wood thats sick

 

[HankHill_K2500]

Hahah yeah it never came with one so my grandpa made it out of wood!


Sent from my propane-converted iPhone

 

[ryandrews123]

this is how i set up mine in my old 94

You must be registered for see images attach

 

[HankHill_K2500]

Sweet! My mic is in the same spot. I wanted to put the radio there too but my trailer brake controller lives there.


Sent from my propane-converted iPhone

 

[HankHill_K2500]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Hopefully that helps


Sent from my propane-converted iPhone

 

[Ruger_556]

You must be registered for see images attach