jidavis3406
Newbie
- Joined
- Aug 16, 2014
- Messages
- 1
- Reaction score
- 0
This started with trying to get interior lights to work when the door opens, on my new to me 94 2 door Yukon. They work with dimmer control, so I moved to replacing door jamb switches. Did passenger side and rear hatch, assumed drivers side was good due to key buzzer working.
No luck with those switches, took dash apart and found relay and wiring in picture. I'm guessing that's for the aftermarket alarm "with no fob of course". I'm guessing the two small connectors are for rear hatch "no buttons in dash for hatch release"
Ran out of daylight or would've traced to make sure those run to the alarm box, and removed it.
No luck with those switches, took dash apart and found relay and wiring in picture. I'm guessing that's for the aftermarket alarm "with no fob of course". I'm guessing the two small connectors are for rear hatch "no buttons in dash for hatch release"
Ran out of daylight or would've traced to make sure those run to the alarm box, and removed it.
You must be registered for see images attach