Idle air control valve connector help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joined
Feb 27, 2024
Messages
17
Reaction score
18
Location
Utah
I was changing my iacv which should have been a easy job but the connector disintegrated when I pulled it off and I lost track of which way was what any tell tell signs of how this plugs in?
 

Attachments

  • 20240307_175649.jpg
    20240307_175649.jpg
    316 KB · Views: 12
  • 20240307_175647.jpg
    20240307_175647.jpg
    346.2 KB · Views: 12
  • 20240307_175644.jpg
    20240307_175644.jpg
    327.4 KB · Views: 11

movietvet

Supporting Member
Supporting Member
Military
Joined
Dec 20, 2023
Messages
1,306
Reaction score
2,769
Location
Oregon
On one side of the connector there is a wide plastic piece and the other side there is a single thin piece and you HAD a spring type clip that held it in the IAC. That broken clip will line up with the tab that the clip would grab on to. Show pics of the female IAC cavity.
 

someotherguy

Truly Awesome
Joined
Sep 28, 2013
Messages
10,132
Reaction score
15,051
Location
Houston TX
Your second picture shows the side with the broken-off clip from your plug. In your first picture you can see the tab on the IAC which is aiming down towards the front of your truck. Make a Sharpie mark on the broken clip part of your plug and orient it towards the tab on the IAC.

Richard
 
Top