DuctTape4Ever
Newbie
First, the good: The heater core in my 88 c1500, heats up and works fine. The Bad: It only blows cold air, and none of the blend door motors work, so I disconnected them. I figure that one of the outside air doors is in the open position. The Ugly: Apparently Red Green must have worked on my truck at one time or another, because my lower HVAC box is cracked, and duct taped back together. I was curious if someone knew how to rig the heater so it is on all the time (when running) and works (even just a little). I have froze my keester off for the last week in Minnesota, so any advice would be greatly appreciated