eric.s.t
Stroked
Alright guys, i know its two complete different topics... But im customizing the read of the frame on my truck. Basicly im going to run a 4 link, with a fuel cell at the rear like one of the members here with the 454ss. My problem is, id run a fuel cell that tucks up as high as i can. I will be cutting some of the box supports, smae as the cross member in the frame that holds the spare up in place. I mesured, and looks like i can put in a tank that is 30 inchs long (front to back) 32 inches wide (frame rail to frame rail) then 11 inches deep(from box to ground) But obviously being a custom cell, does any one know a place around Canada ontario, or even michigan area?
Now for the 4-link, is there a kit that i can buy that will bolt/weld up in place of the leafs. I want to run the 4 link bars on the outside of the frame because in my mind, it should help better on body roll? Or is a 4-link strickly for axle twist? i also want to put coil over suspensions, im guessing a set from a older camero or something would work?
I need info !
Now for the 4-link, is there a kit that i can buy that will bolt/weld up in place of the leafs. I want to run the 4 link bars on the outside of the frame because in my mind, it should help better on body roll? Or is a 4-link strickly for axle twist? i also want to put coil over suspensions, im guessing a set from a older camero or something would work?
I need info !