custom swap, trying to figure out the AC. I both plugs going to the compressor have 12v

[nicklatech]

What are the wire colors?

--
black/white and ????

Its hard to see even with a light. I'm going to find a better light

 

[nicklatech]

--
black/white and green?
Its hard to see even with a light. I'm going to find a better light

I guess its the low pressure switch based on the diagram and the picture below.

You must be registered for see images attach

 

[Black_cirrus]

So are you sure you have enough charge or not to much in the system? I was thinking its the High Pressure switch looking at the pic you posted. If you don't have air flow over the condenser you can get high enough pressure to cause it not to work by design.

 

[nicklatech]

i've only been testing with the truck idling. I just charged the system right before testing out the sensor since I had the system open a couple of days ago.

I'll see if the compressor kicks on when I drive down the road tomorrow. Thanks again for the help!