severedchris
OBS Enthusiast
You must be registered for see images attach
here's a pic of the bed all done
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
You must be registered for see images attach
here's a pic of the bed all done
I think the bed wood will look great Eric! It'll give it a really nice classic feel. Are you planning on keeping the OE gas tank? Or putting a blazer tank or fuel cell between the rear frame rails? If I where you, id shave the gas door and put in in.the bed floor, that'd clean the drivers side of the truck up nicely.
As for the spare tire in the bed, in my opinion it'd look best mounted at the front of the bed at about a 30* angle if you are planning on having a matching spare. You could also recess the in bed filler neck, make a small access panel with a continuous piano hinge; so the filler would be completely hidden!
For the washer tank, you can put a small filler neck on the inside of the bed wall opposite of the OE gas filler neck.