I am putting a 95 EC 4x4 diesel truck on the road that has been well used. I picked up a parts Silverado 95 EC 2wd 5.7 in awsome shape and a knocking motor from which I am taking the doors, fenders and complete interior.
The further I got into the diesel the more cut and spliced wires to bypass the mandatory immobilizer
I really want to start fresh and am wondering if the interior harness is the same in both trucks?
In which case I would remove the dash and steering column without separating the air box and harness from the dash.
Any help or direction is appreciated.
All else fails, I will do a pinout comparison and report.
The further I got into the diesel the more cut and spliced wires to bypass the mandatory immobilizer
I really want to start fresh and am wondering if the interior harness is the same in both trucks?
In which case I would remove the dash and steering column without separating the air box and harness from the dash.
Any help or direction is appreciated.
All else fails, I will do a pinout comparison and report.
