96greenmachine
Newbie
After going back and forth with some people I decided to give comp cams a call and ask for a cam recommendation. After 30 minutes of hold and a 6 minute convo I was given 2 part numbers
Cam #1
08-465-8
I’m not gonna add the specs cause the lift is too high anyways( also only says 87-95 engines?)
Cam #2
08-304-08
Lift: .500/.510
Dur. @050: 210/220
LSA:114
ADV dur: 266/276
From what I can tell cam #2 seems like a pretty good fit after some springs, retainers, and 1.5 roller rockers. I’ve never seen these cams before and neither are listed on comp cams site. Has anyone heard of or even ran these? I’m open to all opinions about them too
Cam #1
08-465-8
I’m not gonna add the specs cause the lift is too high anyways( also only says 87-95 engines?)
Cam #2
08-304-08
Lift: .500/.510
Dur. @050: 210/220
LSA:114
ADV dur: 266/276
From what I can tell cam #2 seems like a pretty good fit after some springs, retainers, and 1.5 roller rockers. I’ve never seen these cams before and neither are listed on comp cams site. Has anyone heard of or even ran these? I’m open to all opinions about them too