lukevegas
Newbie
my 96 4.3 is giving me codes p0102 p1345 p0700 after changing cap a rotor and air filter. The truck will start up and run fine.
96 4.3 throwing codes after cap and rotor replacement
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Did you plug the MAF back in when you diddled with the air cleaner?
Connect scan tool. Adjust distributor to synchronize the cam sensor signal to the crank sensor signal +/- 2 degrees at 1100 RPM.
Apparently transmission control module problems. Does the trans shift properly?
Similar threads
Staff online
-
kennythewelderOfficially Retired, B31-3 (6-G) certified welder.
Members online
- PlayingWithTBI
- BonestockK1500
- termite
- evilunclegrimace
- Tonkaobs
- OlSarge
- Oldsteel_chevy
- boreas
- goodasdead
- 99xcss4
- jus10inbrla
- CrackhaCam
- K9COP357
- david97z71
- Caman96
- Crumbk20
- Eeyore79
- crusty
- 95burban
- fastcheaporright
- johnckhall
- WojTec
- 95RCSB
- Trio
- Stagern
- VictoryRed
- yeobee
- skylark
- kennythewelder
- Onekleanobs
- Bruce93
- maww
- 91k2500Beast
- sethdm02
- El Tigre
- VIKING_MECHANIC
- Orpedcrow
- offroadtahoe
- Lance Lara
- Kings100
- JPVortex
- Charlesteneows
- MarKist
- tybcr783
- skinnyrock
- GMC Burbalade
- Old Blue 92
- wiscobill
- Supercharged111
- Shawnmcsweeney