Flextx500
Newbie
What's everyone using for throttle cable connections and brackets for the Fi-tech? Pics?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I used lokar universal kit. Check my feed for pics.What's everyone using for throttle cable connections and brackets for the Fi-tech? Pics?
I can only see about a 1/4 of it on your pics. I checked out Lokar's website and don't see anything close to what you have.
I did all my homework prior to my build, & went with the Holley Sniper & Hyperspark Dizzy. Plug & Play, self learns & controls timing with ease.... I really hope you have no issues setting up the Fi-Tech!
Not saying what you should have done, NO one could of talked me out of what I wanted! Just wanting to make sure you know how easy the Sniper & Hyperspark work!
All u have to do is obviously make sure the #1 piston at TDC, drop the dizzy in, put the clear cap on that has a little indent on the side, mark that with a sharpie on the housing, rotate it until the rotor lines up with sharpie mark & lock er down. Set the sniper for the timing u want, fire it up & verify what u set matches with a timing light. Too easy. Then the sniper does the rest! U can fine tune & play with timing but I’m going to leave that for when I dyno tune the motor.