after calling people I know all weekend, I have a scan tool that works. now my issue is i don’t know what any of this means. the only thing I find kinda weird is that at about 1300-1500 rpm (which is where it runs the worst) my o2 sensor jumps from about 150 mV to 800+ mV and then back down to 150 ish and it just repeats that. I have no idea if it’s supposed to do that but I’m guessing no since the manual that evilunclegrimace suggested says that it usually stays between 350 mV and 550 mV. But I very well could just be stupid and misread it. Other than that, everything looks pretty normal based on what I read in that book.