Madcrafter52
Newbie
I have a 1994 Chevy k1500 with a 350 TBI that is kicking my butt. Starts fine, idles fine other then a little shutter now and then, snaps the throttle fine, but if I hold the throttle in any position it starts surging and bogging. Definitely worse when warm.
What I have done so far:
Replaced: Plugs, Wires, Cap, Rotor, Coil, ICM, O2 sensor, Fuel Pump, Fuel Tank, Fuel Filter, PCV Valve and hose
Checked and confirmed good: TPS, MAP, Temp Sensor, 0° Ignition Timing
I believe I have fixed all vacuum leaks.
This truck has made my head and wallet hurt and I just want it to work. Everything I do seems to improve it a little but the main issues still stand.
I'm going to re-check the fuel pressure tomorrow with a more accurate 0-20PSI gauge. But other then that I'm at a loss. Any help is much appreciated.
What I have done so far:
Replaced: Plugs, Wires, Cap, Rotor, Coil, ICM, O2 sensor, Fuel Pump, Fuel Tank, Fuel Filter, PCV Valve and hose
Checked and confirmed good: TPS, MAP, Temp Sensor, 0° Ignition Timing
I believe I have fixed all vacuum leaks.
This truck has made my head and wallet hurt and I just want it to work. Everything I do seems to improve it a little but the main issues still stand.
I'm going to re-check the fuel pressure tomorrow with a more accurate 0-20PSI gauge. But other then that I'm at a loss. Any help is much appreciated.