Search results

  1. K

    Black Bear Tune Issue!!

    Yeah that's what I think happened as well. something was put in wrong.
  2. K

    Black Bear Tune Issue!!

    The trucks transmission is completely factory, and it shifts perfectly under part throttle and normal crusing. Although at about 75 percent I believe it will continue to increase in rpm as well. And I prolly chickened out around 5800 rpm.. and I felt bad taking it that damn high. Thanks Greg
  3. K

    Black Bear Tune Issue!!

    My black bear traditional tune for my 1996 k1500 5.7l just came in. Very happy with the way it performs and the changes made. But im having a issue... After I put the pcm in, whenever I get on the truck it will continue to climb in the rpm's even above 5500 rpm.. there is no rev limiter and it...
  4. K

    6" RCX Lift Install Brake Line Question

    When reading through the RCX instructions they say to remove the hard brake line from the rubber in order to reroute them to their new mount. Is there anyway to avoid removing the two lines from one another? I would just imagine they are going to a pain and will more than likely twist the hard...
  5. K

    5.3 or ls1 in a 1996 k1500?

    Has anybody done this? If so was it all that difficult and what was the overall price to complete the install? Thanks Greg
  6. K

    What bolts to use with longtube headers?

    Btw ended up using arp bolts with 3/8 head and .75in long. worked perfect. was able to use all the same bolts also. Greg
  7. K

    What bolts to use with longtube headers?

    Hey, I recently installed long tube headers on my 1996 k1500 5.7. The problem Im having is that the bolts are hard to get tight due to the holes being so close to the primary tubes. I am using both allen wrench head bolts and standard head bolts. Any ideas on what to do? THanks, Greg
  8. K

    cant get 2-4 servo cover off!!!

    well after spraying the thing with pb blaster and putting the clip back in an just driving it for a few days, I tried it again yesterday and as soon as I removed the clip it popped back a little just like in the video. Thanks a lot for the help guys!!! Greg
  9. K

    how to hang true duals after headers??

    i want to do the universals from the parts stores just need advice on where to hang them at on the vehicle
  10. K

    cant get 2-4 servo cover off!!!

    ok i am going to try these things this weekend. Was trying all weekend to wiggle it with pliers and no luck so i just put the clip back in and am now taking it to school and work. I cannot hammer it in to far can I? Thanks Greg
  11. K

    Dual exhaust using stock pipes?

    I just did hedman long tubes to my 1996 k1500 5.7l, And i ordered an x pipe for it and couldnt find a way to get it to fit. it is because of the t-case and all being in the way, I tried to install it right under the transmission snout but couldnt get away with it due to it hitting the drivehaft...
  12. K

    how to hang true duals after headers??

    anyone?
  13. K

    how to hang true duals after headers??

    Hey, I just installed long tubes with true duals. My only question now is if there is a cheap way to hang the exhaust. I looked at the universal hangers at advance but do not know how I would be able to make it work. Any ideas? Thanks Greg
  14. K

    cant get 2-4 servo cover off!!!

    but shouldn't I be able to get enough play out of it to see the o ring? I can t even see it right now.
  15. K

    cant get 2-4 servo cover off!!!

    any information?
  16. K

    cant get 2-4 servo cover off!!!

    I am in the process of doing a corvette servo to my 4l60e but I cant get the cover off for the life of me. I can get the clip off but after that I can not get the cover to budge at all in order to see the seal and cut it. Any advice on what to do? Thanks Greg
  17. K

    1996 k1500 runs terrible when cold after long tube install!!!

    yeah got the codes read today and the passenger side o2 was throwing a code, just bought a new one and a extension. Let you guys know the outcome. Thanks a lot!!!
  18. K

    Where to buy o2 extensions for k1500

    Hey does anyone know where to buy o2 extensions for long tubes on a k1500? Or is there an o2 that is used on another vehicle that is longer and will work on mine? Thanks Greg
  19. K

    1996 k1500 runs terrible when cold after long tube install!!!

    yeah I had a burnt plug wire that I fixed the other day. I left the plugs in while installing the headers so I wonder if I cracked one. I do not really notice an exhaust leak. and when cold the truck does seem to idle at about 1k. I ran the truck open headers for about a day so I wonder if that...
  20. K

    1996 k1500 runs terrible when cold after long tube install!!!

    bump, anyone have any ideas?
  21. K

    1996 k1500 runs terrible when cold after long tube install!!!

    Hey, after installing my long tubes the truck ran fine. Later that night I took the truck out and it ran fine all night in the snow, randomly the truck started to hesitate and backfire and stumble. Also had a rough idle. I have the egr deleted but I do have the o2's on the headers collectors. I...
  22. K

    TBI mid length headers on vortec??

    Are 02 bungs and all still needed when doing the mid length headers? and anything else? also will they fit a 4x4 k1500? Thanks Greg
  23. K

    1990 Suburban Headers on 1996 k1500?

    anyone know?? Looking to pick these up tonight or this weekend if they'll bolt up and fit.
  24. K

    1990 suburban headers on 1996 k1500??

    anyone know?? Looking to pick these up tonight or this weekend if they'll bolt up and fit.
  25. K

    1990 suburban headers on 1996 k1500??

    hey, i am looking to buy used hedman longtube headers off of a 1990 5.7l tbi suburban. does anybody know if these will bolt up to my 1996 5.7l vortec k1500? i know i have to well in 02 bungs and all but just am curious if the fitment will be right.. THanks Greg

Latest posts

Staff online

Members online

... and 5 more.
Total: 1,669 (members: 55, guests: 1,614)

Forum statistics

Threads
64,683
Messages
1,398,778
Members
52,233
Latest member
2640motorcars

Share this page

Top