Search results

  1. HorneDawgZ71

    LED Gauge Install

    Ive replace all the lights in my truck with led. If i adjust the brightness with my light switch 70% of my blue lights start to flicker and look like there about to die. I can dim them a little bit and usually they are just fine after that. I want them on max brightness though without any...
  2. HorneDawgZ71

    14 bolt SF 2wd =( Ive been working on 2 wheel drive 14 bolt and didnt know it.

    I already run 2 inch spacers all the way around lol so I guess 4" in the back isn't safe or good I cleaned this axle forever before primer but I guess my best option is sell it and get the 4 one? Sent from my SAMSUNG-SM-G900A using Tapatalk
  3. HorneDawgZ71

    14 bolt SF 2wd =( Ive been working on 2 wheel drive 14 bolt and didnt know it.

    I've been prepping a 14 bolt SF axle I pulled out of a light duty 2500 and just found out its 63" inches compared to my 4x4 10 bolt that is 67"?? What are my best options here guys. I thinking just sell the axle and buy a 4x4? I just put primer on this ***** lol.
  4. HorneDawgZ71

    Ebay headlights

    I bought my chrome Projectors off eBay about 2 years ago for 80 bucks. Keeping I had to modify the factory brackets to hold the lights. Without the factory brackets they were titled like hell. Every once in a while the high beam side on one of them can get moisture in it but it goes away in a...
  5. HorneDawgZ71

    Post YOUR Favorite Picture of YOUR Truck!!!

    Thanks man! Sent from my SAMSUNG-SM-G900A using Tapatalk
  6. HorneDawgZ71

    Post YOUR Favorite Picture of YOUR Truck!!!

    Pulling trees and chain link fence out of yard Easter Sunday lol Sent from my iPhone using Tapatalk
  7. HorneDawgZ71

    GMT 400 Hydroboost swap

    I pulled my entire Hydroboost unit plus power steering pump out of a 96 6.5 Turbo. I had to buy a new power steering pump because the reservoir didn't fit in my truck. I was having problems installing the new pump as well because the 6.5 Power steering pulley was different and it wasn't...
  8. HorneDawgZ71

    GMT 400 Hydroboost swap

    Is there any special way to install the pump? I line it up and put the bolts through the front bracket and tighten them down, then I tighten down the back bracket and pressed on the pulled and its not correct when I loosen all the bolts I can hold the pump the way it should sit but then none of...
  9. HorneDawgZ71

    GMT 400 Hydroboost swap

    Will a 98 1 ton 7.4l power steering pump bolt into my 98 half ton 5.7l? Doing hydro boost swap and want the correct pump thanks I'm trying to bolt it in but it's not straight the pulley is **** eyed Sent from my iPhone using Tapatalk
  10. HorneDawgZ71

    What do you guys think about my new decals?

    Whenever there can be something like that back in the bed there always is lol
  11. HorneDawgZ71

    Avital 4103 Installed, Loving it

    I read somewhere on the forum about the Avital 4103 being a good remote start system so i picked it up off ebay for 46 dollars. I connected about 9 wires and was good to go. My keyless entry on my truck always always sucked really bad. I feel like this is the best 46 dollars i have ever spent...
  12. HorneDawgZ71

    I am hung on a decision, and I need yalls help.

    White is the only color worth having if you like to actually crawl through the woods and go play in your truck. You get a new paint job a branch gets in your way and you let it drag down your truck your going to cry lol
  13. HorneDawgZ71

    What do you guys think about my new decals?

    I really like the news ones it just looks clean and OEM. When i get a new paint job one day i may de badge the truck but right now the trim and badges and all that is what makes scratches and dents not stand out so much.
  14. HorneDawgZ71

    What do you guys think about my new decals?

    OK im back with new z71 logos before and after what do you guys think now?
  15. HorneDawgZ71

    Rough Country Leaf Springs

    Awesome I know where a pair is where I can get for free thanks y'all!
  16. HorneDawgZ71

    Rough Country Leaf Springs

    How about 1 ton springs with the overload spring out
  17. HorneDawgZ71

    Rough Country Leaf Springs

    Like use the whole 3/4 ton leaf pack and my 4" blocks and that is 6 inches?
  18. HorneDawgZ71

    Rough Country Leaf Springs

    Ok I figured stacking blocks would be a no , yah I missed those on eBay I wasn't to sure I wanted them until I rubbed like crazy yesterday while playing in the snow, but thanks for the help ill track down some 2" leafs, if I crank the front to be 6"s won't it ride like kind of like a factory...
  19. HorneDawgZ71

    Rough Country Leaf Springs

    I know I know I bought the 4" kit instead of the 6" and now I want the leaf springs lol where can I get these for a decent price? what are my options for 2 inch leaf springs. I have 2 inch blocks in my garage is 4+2 inch block dangerous lol im sure it is. I check scratch and dent and rough...
  20. HorneDawgZ71

    RCX Suspension Lift Install Underway

    Yah I just had to read the instructions again, it turns out it wasn't what was causing the popping noise it was actually my idler arm was loose.
  21. HorneDawgZ71

    Show me your 3rd Brake lights!

    I like the way that one looks and i have a red truck to where is that one from or is that just the stock one smoked out?
  22. HorneDawgZ71

    Show me your 3rd Brake lights!

    Yah my friend has one like that and that thing does look pretty bad. I hate smoked lights but i think if i got a dark smoked black one it would looks that bad because im afraid to get a clear one again because it would probably end up looking like crap again lol
Top