Search results

  1. M

    Reverse lights not working. Please Help

    i had the same problem on my truck. a new switch didn't work for me. inside the shifter housing on the shifter there is a nub that pushes on the switch. it wears out over time. i just wired in a toggle switch to bypass the switch. i tried different length switches from diffent manufactures to no...
  2. M

    GMT-400 truck small parts galore.....bolts,brackets,tow hooks..mirrors,hubcaps,ect...

    any luck on locating a 1995 5 speed cluster?
  3. M

    Looking for the right motivation

    This is really what happens when i get bored, I taped the tailgate and rattle canned the black, let it dry then taped off the banner, cut out the letters and edge and then used rustoleum red paint and brushed it on. Took about an hour and a half, Then decided to colormatch the grille
  4. M

    Looking for the right motivation

  5. M

    Mounting some flags... Need help/ideas

    i will take a few pictures tomorrow and post them to show u how it was done
  6. M

    Mounting some flags... Need help/ideas

    what does the military use on the humvees for parades and stuff?
  7. M

    Mounting some flags... Need help/ideas

    hose clamps. my flag had a leather strap inside. the flag is a slip on type. but one with grammets is easier, drill a hole thru the pipe and use a threaded I bolt and use a clip to connect them. Saturday night i was flying down the highway at 70 mph and it was flying stait.
  8. M

    Mounting some flags... Need help/ideas

    i drilled a 1 1/4 inch hole into the front bed rail and used 3/4 galvanized pipe and used pipe straps. once i drilled it out, i used a grommet and put the pole through
  9. M

    Northeast Members

    middlesex very tired. but at least there is mud lol!!
  10. M

    GMT-400 truck small parts galore.....bolts,brackets,tow hooks..mirrors,hubcaps,ect...

    i need an instrument cluster, actually just the gauge faces. i removed mine to sand the back of the gauges and broke it. mine is a 95 only year for this one with the 5k tach (manual trans)
  11. M

    Show Me Your Aftermarket Tail Lights!

    y'all gonna hate these, but they were free, stock ones were smashed
  12. M

    87 Buick Regal w/ "WE4 package"

    awsome car, unfortunalty if i could buy it, i would drive it like it was built for. i'm not a huge fan of keeping a car you don't drive.
  13. M

    Reverse Lights

    automatic or 5 speed. i have the 5 speed and the problem i have is that the switch and lights are good, but the transmission doesn't push on the switch when in reverse.( worn down i guess)
  14. M

    14bolt sf brakes binding

    i just changed out my rear brake cylinders and the shoes with all new hardware and springs, but the driver side wheel keeps binding up, the drums are pretty rusty but they are extremely expensive, would rusted drums make them bind uphttp://www.gmt400.com/forum/images/icons/icon8.png
  15. M

    deleting airbag on 95 k2500

    im looking to change out my steering wheel to one that doesn't have an air bag. how can i get the airbag light on the cluster to stay off
  16. M

    vent shades...

    My opinion is go with two. the rear ones look like ears sticking out lol
  17. M

    Dead Fuel Pump? Best Way To Replace?

    have fun getting the bolts off. lol mine are rusted solid, waiting to find a stepside bed so when i break my bolts i don"t need to struggle getting them out of my old bed rails
  18. M

    can't remove my bed

    thanks for the many suggestions, the plan was to wire wheel the frame while it was off then spray it, so that most likely be the plan. I'm gonna try and make that atf acetone mix, lets see if it works.
  19. M

    The Member Truck Thread

    hello everyone, i recently bought this pretty clean 1995 ecsb 350 5 speed 3:73, 193000 miles , she runs pretty good but she has a few minor issues
  20. M

    can't remove my bed

    being up in the northeast, there is alot of rust on the straps and around the entire frame. and i"m kinda in a rough financial spot r to replace the straps and everything that goes along with dropping the tank. i only need to fix the return fuel line up top, can"t fit my fat hand up there to do...
  21. M

    can't remove my bed

    i can not remove the bolts that hold my bed to the frame, i have a leaking fuel tank and want to remove the bed, i tried all kinds of penetrating oil, and broke a few ratchets impact gun did nothing but shake the rust off, any ideas? i assume i can get new bolts if i cut these right
  22. M

    back-up lights not working

    i got the longer one, i brought the one that was in the truck to match up. three stores tried selling me the one for an automatic, said i brought the wrong switch.
  23. M

    back-up lights not working

    thanks guys, i checked the grounds, new taillight assemblies, i guess it might be the shifter\ lever inside the trans that pushes on switch might be worn. it has 193000 miles,
  24. M

    back-up lights not working

    I'm new to this forum stuff, but i need some help. i recently bought a 95 k2500 350 5 speed( mg5 rpo). i'm having trouble getting the back up lights to work. brakes and signals work, i replaced the switch at the trans, can't figure it out, my wiring diagrams only show me so much and i don't feel...

Latest posts

Members online

Total: 653 (members: 25, guests: 628)

Forum statistics

Threads
64,741
Messages
1,399,740
Members
52,343
Latest member
phillw49

Share this page

Top